Ms. Violet on her Mask

The Polymer Clay Guild of Etsy (PCAGOE) challenge theme for February is "Masks".  This is my entry, meet Ms. Violet on her Mask.

Ms. Violet sits atop the world on her mask. 

This mask is wearable or could be used as a fun piece of wall art.

I love masks and have a small collection from my travels. My favorites are the colorful whimsical ones and I decided that this is what I wanted to do ... something a little off the wall and whimsical for this challenge.

I have several cardboard masks blanks and I decided to use one of them. After ideas floated aimlessly around in my head, I captured a combination of them on paper, just enough to give me direction.  I decided on the colors  and with my new pasta machine with motor easily conditioned all the clay.

wasabi, a mixed forest green, navy blue, mixed violet, bronze and gold 

The build:

More views:

Thank you for stopping by! 

Global Warming - Polar Bear sitting on a Hudson Bay blanket

I knew I wanted to do a globe shaped nightlight for the January PCAGOE challenge theme illumination. I have just finished taking Leslie Blackford's (themoodywoods.com) class at Creative Journey Studios in Buford, GA (creativejourneystudios.com) on nightlights - an awesome experience.

Global warming is of great concern to me and I worry about our future generations both two and four legged when it comes to the changes it is causing in our environment.  I decided to do a polar bear on a shrinking sheet of ice to signify what is happening.  The Hudson Bay blanket takes me back to my childhood when there were no such worries.

The first steps were to gather supplies: lots of conditioned Pardo translucent (a haul from Buford!), alcohol inks, a round globe vase and an electric cord with socket for a night light bulb.

The worse part for me in working with alcohol inks is waiting for them to dry.  Another Buford find was this rubber "brush" to apply a thin layer of ink to the clay, faster drying ... a real score for very impatient me!

I ended up not using the butterscotch - it is put away for votives to come.  The other three colors I used to make a skinner blend - yes me a skinner blend which I wrapped around the globe vase.  Forgetting just as I did in Leslie's class that the open part (top) of the vase is the bottom of the nightlight.  Fortunately with the translucent the skinner blend got lost in the curing - so saved there. While wrapping the clay around the globe I pinched and smudged the sheet to different thicknesses to obtain the effect of ice, even leaving the glass show through in places.  I then used various sizes of round cutters to cut pieces out of the "skin" and fill in with lighter blue and clear translucent circles. A close up of the ice:

I added another layer of clear translucent over the darker top area to lighten the look of the ice.   Just under the "drips" of this layer I highlighted with blue alcohol ink to emphasize the clear layer. The base and iceberg (under the blanket) are made from the same clay  mixture as is used on the globe touched with a little white acrylic paint to represent snow.

Now for the polar bear, unfortunately I have no photos of the process of building her (from white !Premo), but just know that I went trough a bit of a struggle here.  Building creatures is way outside my comfort zone. Everything I came up at first was way too cutesy for such a heavy topic.  I kept going until I felt I had more of an arty looking polar bear.


The finished product!  Approximately 7" tall by 5" wide at the globe's widest point.

To access the light bulb, remove the globe and the the socket is exposed.  The clip on the socket seats into the hole in the bottom, and the feet allow for space for the electrical cord.  Turn on and off with the line switch.

More views!

Would love to hear your thoughts and thank you for visiting my blog!

Mandala inspired by the colors of Thailand

The November challenge for my etsy polymer clay guild is "Mandalas".  When I first started thinking of what to create, I thought of the colors of the mandalas I saw in the temples of Thailand.  Often you could see stunning stain glass mandalas behind statues of Buddha as in this photo I took during our trip.

In addition to the beautiful patterns, I was struck by all the bright colors.  I decided I wanted to use bright colors; those that reminded me of Thailand.  Orange for the monks was a given, teal for the lush jungle vegetation, yellow for the marigold wreaths you see everywhere,  purple for the color of Saturday, blue for the shimmering rivers, wasabi for the cuisine and just a touch of silver.

Next came my drawing.  With polymer clay I seem to have a need to get something on paper as a way of getting an idea to my "right brain".

My idea was to have open spaces in the pattern which would sit on a black base as a background.  I used liquid polymer clay to build the base.  I cured the clay in the largest Fat Daddio's circle cutter.

Now to start the build.  Again using a leaf/tear shape cutter I cut out eight leaves.  I used a circle cut from card stock to build on.  The uncured clay is held in place on the card stock with dabs of liquid polymer clay in the same color.

By this time the drawing is history, I just keep deciding on cutter shapes and colors and keep turing the mandala adding embellishment upon embellishment.  I have to admit, I kept avoiding the middle! Finally ready for the oven:

I noticed a few little details were off a bit, so I straightened those before it went in the oven to be cured.  I also made a pill box cover and retro cane from some of the leftovers.  I always like to take advantage of conditioned clay (one of my least favorite tasks).

When it was cured, I held it up to the light and I really like the way light shown through the open spaces.  I decided against using the black base which would block that look. 

Completed piece: Colors of Thailand Mandala approximately 7" in diameter.

But then: It started to come apart, so on the black background it went.  I always learn valuable lessons in these challenges. 

More colors of Thailand, photography by Betsy Strebe all rights reserved.

A two-contest morning On FIre For Handmade Aurora Reds

Honored to be in two contests this morning.  Check out these fabulous reds

http://onfireforhandmade.com/aurora-red-great-finds/

And vote for your favorite.

pssst! this is mine :)

PCAGOE August challenge "Home Decor"

Winged creature is in the this months PCAGOE challenge "Home Decor".  Click on the link for a chance to win!

http://polymerclayartists.blogspot.com/2014/07/august-challenge-home-decor.html

So proud to be included in the On Fire for Handmade list Home Decor

Decor for your Home curated by On Fire for Handmade on Etsy

Winged Creature night light

This was made for the Polymer Clay Artists Guild of Etsy (PCAGOE) August challenge "home decor".

I've been on a night light kick lately, having lots of fun with translucent polymer clay (liquid and solid) and alcohol inks.  So I knew I would make a night light. I made two for the challenge and this was the one I decided to enter in the challenge.

As always I started with a sketch.  I get these fun ideas and (at my age) if I don't jot them down RIGHT away they are gone forever.  So this sketch ended up in one of many trusted journals. To the right is the drawing on graph paper that will be used to make the pattern.

The graph paper gets glued to thick card stock to make a sturdy pattern.  Here are the pattern, pieces created and cut out.

Okay, now to dye the translucent clay.  This is the hardest thing for me, to wait for the alcohol to evaporate so I can blend the color into the clay.  Really, really hard.  Patience is not what I am know for :). Also you can see the start of cutting the "wings" sections.

The assembly begins with extruded jungle green (I do love that color!), for the framework.

After I added the jungle green body, head and antennae, the piece was cured.  Then it was time to build the backing.  The backing is clear translucent clay, and the purpose is to provide strength and a clean back look. I use poly bonder to combine the layers.

The finished product is a large 5" tall x 4 1/2" wide by 1 1/2" deep:

light on

light off

on from the side

view of the back 

Thank you so much for sharing my experience.  I would love to hear your comments.